Pelatihan Pembuatan Teknik Joint Pada Produk Kapstok Kunci Dinding Untuk Siswa dan Siswi SMK

Authors

  • Mesah Nur Sejati Universitas Mercubuana Jakarta
  • Aji Wicaksono Universitas Mercubuana Jakarta
  • Dena Anggita Universitas Mercubuana Jakarta

DOI:

https://doi.org/10.61132/mengabdi.v2i2.514

Keywords:

Joint Technique, Kapstok, Wall Lock

Abstract

Background: Looking at developments in vocational schools, vocational schools in profile are education at the secondary level which has the aim of developing the skills possessed by female students. Basically, in this vocational school, skills are still obtained as a result of the direct learning process every day at the school. Then graduating students can immediately enter industry. The aim of this research is training in making joint techniques for wall lock kapstok products for vocational school students and female students. Training method for making joint techniques on wall lock kapstok products for vocational school students and students. First of all, through the preparation of reference images, the drawing process, the design process and the capstock making process (hemming process, forming process, engraving, finishing materials. There were 15 vocational school students participating. Results: Vocational school students understood the training in making joint techniques in Wall lock kapstok products Conclusion: So the training activity for making joint techniques on wall lock kapstok products for vocational school students and students is an activity that can raise existing problems, especially for vocational school students who previously knew about design science but Finally, we can produce functional Kapstok products.

Downloads

Download data is not yet available.

References

Aji, S., & Dermawan, L. (2013). Alternatif Sambungan Finger Joint pada Balok Kayu terhadap Pengujian Kuat Lentur. Majalah Ilmiah UKRIM, 2, 12–26.

Andi Prayoga, P., Wira Buana, P., & Agung Cahyawan Wiranatha, A. A. K. (2017). Rancang Bangun Aplikasi Permodelan Sambungan Kayu (Wood Joint) dengan Objek 3D Berbasis Android. Merpati, 5(3), 11. https://doi.org/10.24843/jim.2017.v05.i03.p02

Endayani, T., Rina, C., & Agustina, M. (2020). Metode Demonstrasi Untuk Meningkatkan Hasil Belajar Siswa. Al - Azkiya : Jurnal Ilmiah Pendidikan MI/SD, 5(2), 150–158. https://doi.org/10.32505/al-azkiya.v5i2.2155

Haryani, N. R., & Zulaikha, E. (2018). Eksperimen Sistem Sambungan Tanpa Penggunaan Sekrup dan Baut untuk Display Pameran. JURNAL SAINS DAN SENI ITS, 7(2).

Khurniawan, A. W. (2015). SMK Sekolah Menengah Kejuruan Dari Masa ke Masa. In Kementerian Pendidikan dan Kebudayaan.

Kumaat, H. (2018). Persepsi Masyarakat terhadap Sekolah Menengah Kejuruan (SMK) sebagai Upaya Memasuki Dunia Kerja. Seminar Internasional, APTEKINDO, 1907–2066, 379–384.

Nurhayati, L., & Dewantoro, A. D. (2023). Pengendalian Kualitas pada Proses Pembahanan Kayu Finger Joint Laminating dengan Integrasi Seven Tools dan Quality Function Deployment. MATRIK Jurnal Manajemen Dan Teknik Industri-Produksi, XXIII(2), 179–194. https://doi.org/10.350587/Matrik

Yanto, Usman, F. H., & Ahmad Yani. (2014). Sifat Mekanik pada Sambungan Kayu Nyatoh (Palaquium xanthochyum pierre) berdasarkan Bentuk Sambungan dan Macam Alat Sambung (Vol. 2, Issue 2). https://jurnal.untan.ac.id/index.php/jmfkh/article/view/6868

Downloads

Published

2024-04-30

How to Cite

Mesah Nur Sejati, Aji Wicaksono, & Dena Anggita. (2024). Pelatihan Pembuatan Teknik Joint Pada Produk Kapstok Kunci Dinding Untuk Siswa dan Siswi SMK. MENGABDI : Jurnal Hasil Kegiatan Bersama Masyarakat, 2(2), 27–38. https://doi.org/10.61132/mengabdi.v2i2.514

Similar Articles

You may also start an advanced similarity search for this article.